Figure 5-16 Printing The Latent (Pre-Transfer) Image On The Drum - Tektronix Phaser 340 Service Manual

5
Theory of Operation
300 dpi printing: 1216 columns
of pixel dots, created by the
even-numbered jets, interlaced
with 1216 columns of pixel dots
created by the odd-numbered
jets. Each jet is responsible for
28 columns of dots.
600 x 300 dpi printing: 2432
columns of pixel dots, created
by the even-numbered jets,
interlaced with 2432 columns
of pixel dots created by the
odd-numbered jets. Each jet
is responsible for 56 columns
of dots.
Jet 2
Jet 87
Jet 88
Jet 1
Diagnostic prints: 88 parallel
bands, each made of 28 columns
of pixel dots.
Jet 2
Jet 88
Jet 1
Jet 87
9100-26

Figure 5-16 Printing the latent (pre-transfer) image on the drum

Service Manual 5-23