Figure 6-4 Pc-Based Diagnostics Screen Display - Tektronix Phaser 340 Service Manual

6
Troubleshooting
6-30 Phaser 340 Color Printer
8. Once communication with the printer is made, the diagnostics display
the following screen on the computer:

Figure 6-4 PC-based diagnostics screen display

The start-up screen features the following elements:
A conventional-looking Menu Bar across the top of the screen; all
diagnostic functions are accessible via this menu.
The middle of the screen is a blank gray area; this is a 23x80 "tty" in
which all interaction takes place with the tests when they are running.
The bottom line of the screen gives feedback about the state of the
system; it's divided into four fields:
The left-most is the largest field, and it is the "message" field; it
contains descriptive text summarizing the operation of tests in progress
and of the diagnostics program itself.
Next is the completion indicator. When downloading test files to the
printer, this field indicates the progress of the operation with a
percentage complete display "n%" (where n is 0 to 100). When
running a lengthy series of tests, a display "n of N" indicates the test
progress.
Third is the "view" field. This indicates which "channel" is being
viewed in the tty screen. It has one of 3 values: "29K" when
viewing 29K tests, "68K" when viewing 68K tests.