Table of Contents
Advertisement
Chapter 1: Installing Hardware for the G150 Media
Plan the Installation
In the following sections of this installation guide, you will be guided through the installation of
several configurations. Before the G150 Media Gateway components are physically installed on
the customer's site, several steps will already have been completed to assure that the actual
installation will go smoothly:
Sales personnel have verified that the product is suited to the customer's application.
Planning and implementation personnel have conducted preliminary inspections of the site
and of the other equipment to assure that the G150 solution will operate at its full potential.
A data network readiness assessment has been completed to assure that the solution will
function optimally within the customer's network.
Each of these processes have been documented before the installation. You should verify that
you have all the necessary information before going to the site (see
Checklists).
Use the Planning Documentation
To guide you in your preparations for the installation, use the Installer's Checklists (see
Appendix B: Information
that you need to install the G150.
The planning documentation will provide you with information about:
What equipment you will be installing
What kind of system you will be integrating
Whom to contact on site about delivery, system questions, or network concerns
Whom to contact at your home office in case of questions
Whether you need a special pass or an escort
How to gain entrance to the installation location if it is locked
Where to install equipment
Where to find a telephone near the installation location
Gateway
Checklists) to verify that you have the tools, software, and information
Appendix B: Information
Issue 1 June 2005
21
Advertisement
Table of Contents
