Typical Configurations; Sample Small Branch Office Setup - Avaya G150 Installation And Configuration Manual

5 frames of jitter buffer
RFC 2507, 2508, 2509 - Header Compression
RFC 2474 - DiffServ, Type of service field configurable
RFC 1990 - PPP Fragmentation
RFC 1490 - Encapsulation for Frame Relay
RFC 2686 - Multiclass Extension to Multilink PPP
FRF 12 - Frame Fragmentation
For information on configuring QoS on the G150, see
Chapter 3.

Typical Configurations

The following sections illustrate two typical scenarios for usage of the ports on the G150. These
are configuration examples only and are intended to demonstrate the flexibility of the G150.

Sample Small Branch Office Setup

A small branch office that requires the following connectivity:
Two analog trunks
One IP WAN connection to the Communication Manager (shown as a DSL connection in
Figure 4.
Two analog telephones & one fax
Up to four IP telephones
One printer
Voicemail at company HQ
Solution (for this sample scenario only)
G150 2T +4A (4 VoIP)
Wireless LAN card - 802.11b (Optional)
Licence Key Device & Access Point RFA
Up to 4 x IP trunks via 10/100 WAN port
2 x Analog trunks for local calls or fall-back
4 x IP phones (each with 1151B1 PoE PSU)
1 x spare analog extension port
DiffServe Settings for VoIP Calls
Issue 1 June 2005
G150 Models
in
33