Power Supply Requirements - Avaya G150 Installation And Configuration Manual

Installing Hardware for the G150 Media Gateway
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink
or laundry tub, in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may
be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries
in a fire. They may explode. Check with local codes for possible special disposal
instructions.

Power Supply Requirements

G150 should only be connected to a clean power supply or to a UPS with 3-pin connectors
including earth.
!
CAUTION:
The Lump-in-Line PSUs supplied with each G150 module must only be
CAUTION:
connected to a 50/60Hz, 100-240V power source.
UPS Equipment :
The use of UPSs to support the G150 system during mains power failure is highly
recommended. Such equipment also provides mains conditioning. Contact Avaya for details of
preferred and tested suppliers and models.
38 Installation and Configuration of the G150 Media Gateway