Table of Contents
Advertisement
Chapter 18
User, User Group, and RADIUS Commands
set radius authentication udp-port
User level: supervisor
Use the set radius authentication udp-port command to set the RFC 2138
approved UDP port number for RADIUS authentication.
Normally, the UDP port number should be set to its default value of 1812. Some early
implementations of the RADIUS server used port number 1645.
Syntax:
The syntax for this command is:
set radius authentication udp-port <number>
Example:
W310-1(super)# set radius authentication udp-port 300
Related Commands:
Use the
show radius authentication
authentication settings.
set radius secret
User level: supervisor
Use the set radius secret command to set the RADIUS shared secret.
Syntax:
The syntax for this command is:
set radius secret [string]
Syntax
[string]
Example:
W310-1(super)# set radius secret hush
404
command to display all RADIUS
Description
password
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
