Table of Contents
Advertisement
4. In the IP Address field, enter the IP address of a valid LAN1 address.
5. The default IP Mask of 255.255.255.0 is automatically entered. Alter this to
255.255.255.255.
6. Leave the Gateway IP Address field blank.
7. Under the destination Destination field, select LAN1.
8. Tick the ProxyARP option.
9. Click OK.
10. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.
DHCP on LAN2
When using Proxy ARP, if there is a network DHCP server on LAN2, this DHCP server must
NOT allocate IP addresses outside LAN2. In other words, the DHCP server must be configured
to not allocate addresses to devices on LAN1. In this example, the DHCP server should only
allocate addresses 192.168.43.x and not 192.168.42.x.
Configuring LAN1
Do the following to configure LAN1:
1. Click
to receive a configuration form. The Receiving Config from dialog box appears
displaying the IP address of the G150. Enter the G150 system password.
2. Click System from the Configuration Tree and double click the G150 configuration on the
right hand side of the display window.
Connecting G150 to the Network & Communication Manager
Save. In the Sending
Issue 1 June 2005
133
Advertisement
Table of Contents
