Table of Contents
Advertisement
Telephone Number Characters
In relation to short codes, the Telephone Number field can reflect the number dialed by the short
code or parameters for the short code feature. For example, this field can contain user names
and telephone numbers (including those with special characters).
The Telephone Number field can contain numbers and the following characters:
C – Place digits following the "C" in the outgoing call's Called Number field rather than
Keypad field (this is the default).
E – Replace with the Extension Number dialing the Short Code.
K - Place the digits following the "K" in the outgoing call's Keypad field rather than Called
Number field. Only supported on ISDN/QSIG.
L - Use the last number dialed.
N - Substitute with digits dialed for N or the string of "X"s in the Short Code field.
S - Place the digits following the "S" into the outgoing call's Calling Number field.
U - Replace with the User Name of the User dialing the Short Code.
@ – Enter following digits into sub-address.
. – Replace with current dialed digits, ie. those that have been dialed so far and triggered
the short code match.
, – One second pause in between DTMF digit dialing.
" " – Any text must be surrounded by quotation marks, eg. User Names.
System default shortcodes for a G150 set to a US locale:
G150 is predefined with default feature access codes and trunk access codes.
The system short codes in this table come as default with the G150 configuration when the
system locale is set to enu (North America) in Manager's System configuration form.
Table 12: G150 North American Default Short Codes
Short
Number
Code
*6
Blank
*9
Blank
[9]0N;
0N
Line
Feature
Group ID
0
Call Pickup Any
0
Last Number
Redial
0
Dial
Using Shortcodes
Comment
Picks ups any ringing call.
Redials the last number
dialed.
Dialing prefix for an outside
line and phone numbers
starting with 0.
1 of 2
Issue 1 June 2005
147
Advertisement
Table of Contents
