Snmp Traps - Avaya G150 Installation And Configuration Manual

Hide thumbs Also See for G150:
Table of Contents

Advertisement

Configuring the G150 Media Gateway with Manager
4. On the Voicemail tab, a Voicemail On option is available to enable callers to leave
voicemail messages to the Main hunt group mailbox. If the option is not ticked, then
voicemail will not be enabled for the hunt group.
5. When all necessary updates have been made, click OK.
6. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.

SNMP Traps

G150 SNMP traps can be configured via the SNMP tab within the Manager System
configuration form. Traps can be sent to two independent IP addresses, for applications where
an end-user and maintainer both need to be notified of a fault. This is cofigurable via the Trap
Destination 1 and Trap Destination 2 area within the SNMP tab. The SNMP configuration
window within Manager is displayed below:
Figure 59: Manager SNMP Configuration screen
126 Installation and Configuration of the G150 Media Gateway
Save. In the Sending

Advertisement

Table of Contents
loading

Table of Contents