Compliance With Fcc Rules - Avaya G150 Installation And Configuration Manual

Table 40: Port Classifications (continued)
Port Name
External O/P socket (not
used)
DC Input port
Interconnection circuits shall be selected to provide continued conformance with the
requirements of EN 609050:1992/A3:1995 clause 2.3 for SELV circuits and with the
requirements of clause 6 for TNV circuits, after connections between equipment.

Compliance with FCC Rules

Transmit and Receive Gain Settings for PRI/T1 and Analog Ports
The Gain settings are password controlled for use by qualified installation personnel only and
must not be made available to the end user. The default gain settings of 0dB ensures
compliance with FCC part 68 section 68.308(b)(5) and TIA/EIA-IS-968 Section 4.5.2.5.
"Through transmission amplification from ports for the connection of separately registered
equipment or from other network connection ports". Gain setting adjustment by unqualified
personnel may result in violation of the FCC rules. Qualified personnel may adjust gain settings
above these levels only where:
Measurement is made to ensure that the power levels sent to line at each network
interface connected does not exceed the maximum levels specified in FCC part 68 section
68.308(b) and TIA/EIA-IS-968 Section 4.5 for that specific interface type.
Where gain adjustment away from the default values are made, precautions should be
taken to ensure that the connection of terminal equipment is controlled by qualified
installation personnel.
Port Description
Connector for controlling
ancillary circuits
Connector for DC input power
Port Pinouts and Cables
Port Classification
SELV
SELV
2 of 2
Issue 1 June 2005 199