Table of Contents
Advertisement
Configuring the G150 Media Gateway with Manager
The Manager Application Software
Programming Tools
The G150 supports programming through any one of its 10/100 Base-T switch port connections.
The tools required for programming of a newly installed G150 system are:
PC running Windows 98 (2nd Edition), 2000 Professional (SP2) & Server (SP2), XP
Professional & XP Professional Server, NT4 Workstation (SP6) & NT4 Server (SP6) or
2003.
- If you are installing Voicemail Pro on the same PC, only 2000 Professional (SP2) &
Server (SP2), Windows XP Professional & XP Professional Server, or 2003 is
supported. Voicemail Pro is only supported on these operating systems. See
4: Voicemail for G150 Media Gateway
PC with a LAN (NIC) card with either a fixed IP address (allocated by your system
administrator) or by using DHCP to obtain an IP address.
G150 Cat. 5E patch cable (red - supplied with system).
G150 Feature Key (optional).
PC to G150 LAN Port Connection
A G150 system, when first powered up, will scan LAN1 and LAN2 for a DHCP server that will
allocate it with an IP address. If the G150 system does not find a DHCP server, then it will
automatically become a DHCP server itself with an IP address of 192.168.42.1. The G150
system will allocate an IP address to the PC if required. Initially, the G150 system assumes that
all addresses are on the local LAN and that the PC software supplied uses broadcast to
establish communication with the G150 system.
The G150 can be connected in one of two ways; either directly to a PC or as part of a LAN. Both
methods use a G150 Cat. 5E patch cable connected between one of the LAN ports on the front
of the G150 and the PC/LAN.
Direct Connection: This method is used for local system programming directly from a PC.
LAN Network Connection: This is the option to use for remote programming access. It will
require liaison with the LAN network manager to obtain the IP address details and to
ensure that the IP traffic routing is allowed. When connected to an IP LAN network, you
must consult with the Network Manager to obtain the required IP settings. For IP
operation, the G150 requires a static IP address including a subnet mask and default
gateway value.
88 Installation and Configuration of the G150 Media Gateway
for information on Voicemail Pro.
Chapter
Advertisement
Table of Contents
