Table of Contents
Advertisement
Configuring the G150 Media Gateway with Manager
Testing an Installation
It is highly recommended that a verification process takes place to ensure that all installation
and configuation has been performed correctly. This verification process should be performed in
2 stages:
G150 not connected to the Communication Manager (survivable mode).
G150 connected to the Communication Manager (sub-tending mode).
Verificaton in Survivable Mode
Prior to connecting the G150 to Communication Manager, plug the IP phones into the LAN ports
on the front of the G150 and verify the following:
Ensure all IP phones register with G150.
Ensure two-way speech between two IP phones.
Ensure two-way speech between an analog phone and an IP phone.
Verification in Sub-tending Mode
Once all configuration has been made, plug the IP phones into the LAN ports on the front of the
G150 and connect the G150 to the Communication Manager. Verify that the connection is
established and the IP phones are configured correctly by ensuring there is two-way speech
between the following:
A local IP phone and a phone at the Communication Manager site.
A local analog phone and a phone at the Communication Manager site.
A local IP phone and a local analog phone.
If there is a PC on the newly created LAN, ensure that this PC can ping the Internet.
If other remote gateways are connected to the Communication Manager, ensure two-way
speech between a local IP phone and a phone at the remote gateway.
144 Installation and Configuration of the G150 Media Gateway
Advertisement
Table of Contents
