Set Radius Authentication Udp-Port - Avaya G250 Reference

User level
read-write
Context
general
Example
To set the primary RADIUS authentication server IP address to be 192.40.12.36:
G350-147# set radius authentication server 192.40.12.36 primary
Related commands
clear radius authentication
retry-number, set radius authentication
authentication udp-port,

set radius authentication udp-port

Use the set radius authentication udp-port command to set the RFC 2138 approved
UDP port number.
Normally, the UDP port number should be set to its default value of 1812. Some early
implementations of the RADIUS server used port number 1645.
Syntax
set radius authentication udp-port number
Parameters
Parameter
number
User level
read-write
Context
general
Example
To set the UDP port number to 1645:
G350-001# set radius authentication udp-port number 1645
server, set radius authentication,
retry-time,
show radius authentication
Description
The UDP port number
Alphabetical listing of CLI commands
set radius authentication
set radius authentication
Possible Values Default Value
1812
Issue 1.1 June 2005
secret, set radius
481