Table of Contents
Advertisement
It is highly recommended that the Manager application is upgraded first and then upgrade the
G150 core software.
If you have obtained .bin files from another source, check that you have a copy of any
instructions provided with those bin files and check that the system complies with those
instructions. Backup the existing .bin files and then copy the new files into the Manager's
Working Directory.
Make Copy of Configuration File
Make a copy of the current configuration file by saving it offline before performing the upgrade.
If the upgrade fails, the current configuration may be erased so a backup copy is an essential
precaution.
To save an existing configuration file offline:
1. With the configuration file opened on Manager, click File | Save As.
2. On the Save As window, browse to the folder directory in which you want to save the
configuration file.
3. Click Save.
Upgrading Manager
When upgrading a G150 from one core software level to another, the recommended process is
to upgrade Manager as well. This is done by uninstalling and then reinstalling the application
software.
The uninstall process below only removes those files installed during the original application
installation. Any other files added since (user files, system configurations files, etc.) are not
removed.
To remove Manager:
1. Open the Windows Control Panel (Start | Settings | Control Panel).
2. Select Add/Remove Programs.
3. Select the application suite to be removed. The Manager application is stored within the IP
Office Admin Suite.
4. Click Add/Remove.
5. From the options offered select Remove. This process only removes those files installed
during the application suites original installation. Any other files added since (user files,
system configurations files, etc.) are not removed.
6. Follow any prompts given during the removal process.
7. Click OK to finish and close the Control Panel.
8. The new version of Manager can now be installed.
Issue 1 June 2005
213
Advertisement
Table of Contents
