Analog Trunk Configuration - Avaya G150 Installation And Configuration Manual

Configuring the G150 Media Gateway with Manager
Figure 49: G150 DiffServe Configuration
3. On the Gatekeeper tab, the following fields can be configured in relation to DiffServer:
DSCP: Default = 46; (Decimal value)
The Quality of Service (DiffServe) setting applied to VoIP calls. The Hex value equivalent
of the DSCP field will be updated automatically when this field is configured.
SIG DSCP: Default = 0; (Decimal value)
The Quality of Service setting applied to VoIP call signaling. The Hex value equivalent of
the SIG DSCP field will be updated automatically when this field is configured.
4. Click OK.
5. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.

Analog Trunk Configuration

Control of trunks in sub-tending mode is driven by Communication Manager, with the exception
of certain low level analog trunk parameters, which are configurable via Manager.
To configure settings on the analog trunk:
1. Click
displaying the IP address of the G150. Enter the G150 system password.
106 Installation and Configuration of the G150 Media Gateway
to receive a configuration form. The Receiving Config from dialog box appears
Save. In the Sending