Table of Contents
Advertisement
Administer Remote office
Perform Remote Office administration in Communication Manager on the media server before
registering the G150 Media Gateway endpoints. This administration includes administering the
G150 Media Gateway (Remote Office) and G150 stations.
Instructions
Remote Office
1. Type add remote-office <number> and press ENTER to display the Remote Office
screen.
The system displays the Remote Office screen.
Figure 27: Remote Office screen
add remote-office 6
Node Name:
Network Region:
Location:
Site Data:
2. Complete the following fields:
Node Name: Assign a node name to the Avaya G150 Media Gateway. This name must
correspond to the node name used on the IP Node Names screen.
Note:
This name must also match exactly the name of the G150 Media Gateway as
Note:
entered on the System | SO Gateway | Gateway Name configuration in the
G150 Manager. See
Chapter 3.
Network Region: Assign the number of a previously administered Network Region for
the G150 Media Gateway. If a Network Region is not assigned, use the region
associated with the C-LAN.
Location: Assign the number of a previously administered Location for the G150 Media
Gateway on the Locations screen. If a location is not specified, this field defaults to 1.
Site Data: Provide relevant location and site data.
REMOTE OFFICE 6
remoG150denver
22
2
Contact: Joe Smith
Phone: xxx-yyy-zzz
_______________________________
Identifying the G150 to the Communication Manager
Administer Remote office
Page 1 of 1
in
Issue 1 June 2005
69
Advertisement
Table of Contents
