Communication Manager Administration for the Avaya G150 Media Gateway
Instructions
To administer the network region for both the server's central gateway and the G150 Media
Gateway, do the following:
1. Type change ip-network-region <number> and press ENTER to display the IP Network
Regions screen.
The system displays the IP Network Region screen.
Figure 22: IP Network Region screen, example for server.
change ip-network-region 1
Region: 1
Location: 1
Name: MainS8500HQ
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 65535
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 46
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffice Interval (sec): 20
Keep-Alive Interval (sec): 6
2. On the IP Network Region screen, complete the following fields:
Name: Assign a unique name to the network region of the server's central gateway.
CODEC Set: Assign the CODEC set for the Network Region, usually 1.
Intra-region IP-IP Direct Audio: Type y (yes) to allow shuffling between endpoints in the
server's region.
Inter-region IP-IP Direct Audio: Type y (yes) to allow shuffling between server's
endpoints and endpoints in other network regions.
60 Installation and Configuration of the G150 Media Gateway
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: y
Inter-region IP-IP Direct Audio: y
Keep-Alive Count: 5
IP Audio Hairpinning? y
RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Server IP Address:
Server Port: 5005
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y
RSVP Profile: guaranteed-service
RSVP unreserved (BBE) PHB Value: 40
Page 1 of 19
.
.
.
RSVP Enabled? y