Using Lan1 For Ip Phones And Connection To Communication Manager - Avaya G150 Installation And Configuration Manual

Configuring the G150 Media Gateway with Manager
3. Right-click within the right hand side of the Manager window and select New.
Figure 63: IP Route for a WAN Link
4. Leave the IP Address field blank to create a default IP route.
5. Leave the IP Mask field blank.
6. Leave the Gateway IP Address field blank.
7. Under the destination Destination field, select the Service created above.
8. Click OK.
9. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.

Using LAN1 for IP Phones and Connection to Communication Manager

If IP phones are used, they must be connected via the LAN ports on the front of the G150. One
of these ports can also be used to connect to the network/Communication Manager. These
ports are configured via the LAN1 tab on Manager's System configuration form.
A diagram of this setup is provided in
140 Installation and Configuration of the G150 Media Gateway
Figure 64.
Save. In the Sending