Table of Contents
Advertisement
Backup files on save: Default = On
If on, whenever a copy of a configuration is saved on the Manager PC, any existing
saved copy is renamed with the backup file extension name (see below).
Backup file extension: Default = .BAK
The file extension used for backup configuration files.
5. Click OK.
6. The newly entered IP address is now specified for the G150. This can be confirmed by the
display of the IP address on the Manager's title bar as show in
Figure 44: Manager Title Bar
7. Once the IP address has been entered, the specific G150 system can be selected for
configuration (if the selection has been changed) by simply going to File | Preferences and
selecting the IP address before opening a configuration.
Change System Password
Part of the default configuration that comes with the G150 is the system password. This
password controls access to the operation of the G150 and is required to configure and
administer the G150. The default system password is password and is required when receiving
the default configuration from the G150.
For security purposes, we recommend that this password is changed as soon as possible.
To change the system password:
1. Click
to receive a configuration form. The Receiving Config from dialog box appears
displaying the IP address of the G150. Enter the G150's default password of password (all
in lowercase).
2. Click System from the Configuration Tree.
The Manager Application Software
Figure
44.
Issue 1 June 2005
97
Advertisement
Table of Contents
