Port Redundancy Configuration Examples; Configuring Port Mirroring - Avaya G350 Administration

Configuring advanced switching

Configuring port mirroring

Port redundancy configuration examples

This section provides port redundancy configuration examples.
The following example creates a port redundancy pair:
G350-003(super)# set port redundancy 6/3 6/5 on 1
Monitor: Port 6/5 is redundant to port 6/3.
Port redundancy is active - entry is effective immediately
The following example deletes a port redundancy pair:
G350-003(super)# set port redundancy 6/3 6/5 0
Entry Monitor removed: Port 6/5 is not redundant to port 6/3.
The following example enables all configured port redundancies:
G350-003(super)# set port redundancy enable
All redundancy schemes are now enabled
The following example disables all configured port redundancies:
G350-003(super)# set port redundancy disable
All redundancy schemes are disabled but not removed
The following example configures the switchback interval for all configured port redundancies:
G350-003(super)# set port redundancy-intervals 60 30
Done!
The following example displays port redundancy information:
G350-003(super)# show port redundancy
Redundancy Name
-----------------
Monitor
Minimum Time between Switchovers: 60
Switchback interval: 30
Configuring port mirroring
This section provides information about configuring port mirroring on G350 devices and includes the
following topics:
•
Port mirroring overview
•
Port mirroring CLI commands
port mirroring on the G350
•
Port mirroring configuration examples
116
Primary Port Secondary Port
-------------- ----------------
6/3
— an overview of port mirroring on the G350
— a list and description of the CLI commands used to configure
— examples of port mirroring configurations
Administration of the Avaya G350 Media Gateway
Status
--------
6/5 primary
June 2004