Quick Reference Install And Configuration - Avaya G150 Installation And Configuration Manual

Quick Reference Install and Configuration

G150 is a flexible product that can be set up and configured in several ways, depending on
network requirements, IP phone usage, etc. However, there are bare minimum installation and
configuration steps required to get G150 functional. These steps are:
Configure Communication Manager to communicate with the G150. See
3: Configuring the G150 Media Gateway with
Install the Manager application. See
Manage Administrator and other operator accounts for access to Manager and G150 as
necessary. See
Specify an IP address for the G150 (if necessary). See
G150 on page 95.
Change the G150 system password. See
Configure G150 to communicate with Communication Manager. See
the Communication Manager
Configure trunks on the G150. See
Administer G150 dial plan to correspond with the dial plan on Communication Manager.
See Dial Plan Administration
Connect all telephones to the G150. See
Support.
Test the phones in survivable mode. See
Connect G150 to the network and Communication Manager. See
Network & Communication Manager
Test the phones in subtending mode. See
Update Manager Account Information
on page 99.
Trunk Configuration
on page 119.
Manager.
The Manager Application Software
on page 93.
Specify an IP Address to the
Change System Password
on page 104.
Chapter 5: G150 Media GatewayTelephone
Testing an Installation
on page 128.
Testing an Installation
Chapter
on page 88.
on page 97.
Configure G150 for
on page 144.
Connecting G150 to the
on page 144.
Issue 1 June 2005 87