Appendix G: Loss Plan Settings - Avaya G150 Installation And Configuration Manual

Appendix G: Loss Plan Settings

This appendix lists the loss plan settings for the following country codes:
In the host Communication Manager system, there is the ability to administer the loss/gain of
the "outbound" signal on the line, trunk, and media processor circuit packs.
This appendix discusses how this is done for optimization of transmission audio amplitude.
Note that all values listed are relative to "loss." Therefore, a negative value actually refers to a
"gain."
The following sequence is needed to change the Communication Manager loss plan to
accommodate proper transmission loss/gain so as to mitigate the effects of echo and provide
proper audio levels:
1. Make sure that you have subscribed to the feature of loss plan administration in the
System-Parameters Customer-Options screen on Communication Manager by typing
display system-parameters customer-options and pressing ENTER. Check that the
parameter Digital Loss Plan Modification field is set to y to allow the customer to modify
loss/gain settings.
2. Type change system-parameters country-options and press ENTER. On the
System-Parameters Country-Options screen, page 2, set the correct country code in the
Digital Loss Plan field. For this example, let us assume that we have programmed 1 for the
USA.
3. If you wish to customize the screen for the G150, change the Customize field to y.
Settings
Australia settings
Belgium settings
France settings
Germany settings
Italy settings
Japan settings
Netherlands settings
Nordic settings
United Kingdom (UK) settings
United States (US) settings
Country codes
2
8, 11, 18
12
13, 25
4, 23
3
5
24
10
1, 6, 7, 9, 14-17, 19-22
Issue 1 June 2005 231