Table of Contents
Advertisement
Communication Manager Administration for the Avaya G150 Media Gateway
Figure 34: Group Member Assignments screen
add trunk-group 5
GROUP MEMBER ASSIGNMENTS
Port
1:IP
2:IP
3:
4:
5:
6:
7:
8:
9:
10:
4. On the Group Member Assignments screen, complete the following fields to add trunk
group members:
Port: Type IP.
Sig Grp: Assign the number of the signaling group that provides the signaling channel for
this trunk group. Either two trunks (for the G150 2T + 4A model) or four trunks (for the
G150 4T+4A+8DS model) may be designated in this group.
5. Type change signaling-group <number of signaling group> and press ENTER to return
to the signaling group screen. See
6. In the Trunk Group for Channel Selection field, type the number of the trunk group that
should be associated with this signaling channel.
7. Press ENTER to save your changes.
Administer loss plan
To administer a loss plan, see
These are used to optimize the transmission path gain/loss for a given communication call.
78 Installation and Configuration of the G150 Media Gateway
TRUNK GROUP
Code 5Fx Name
Night
ro-anal-den
1
ro-anal-den
2
Figure
Appendix G: Loss Plan
Administered Members
Total Administered Members: 2
Sig Grp
5
5
32.
Settings.
Page 6 of 22
(min/max): 1/2
Advertisement
Table of Contents
