Table of Contents
Advertisement
Installing Hardware for the G150 Media Gateway
for LAN crossover cables when connecting to a hub. They can also be used to connect to
IP telephones (Avaya 4600 IP series). LAN ports allow information relating to incoming
and outgoing telephone calls to be forwarded to PC based applications. They also provide
access to the router functionality/configuration of the G150 platform for both data and
Voice over IP (VoIP) calls. Within the configuration software application (Manager), these
ports are referred to as LAN1.
WAN Port: This is a 10/100Mbs Ethernet LAN port for connection to an IP routed WAN
(e.g. DSL). Within the configuration software application (Manager), this port is referred to
as LAN2.
Cables
G150 is supplied with one red CAT 5E cable. For Port Pinouts and Cables, refer to
A: Technical
Data.
G150 2T + 4A (4 VoIP)
This variant of the G150 includes the following:
Two Analog Loop Start Trunks (Two-way CO Trunks)
Four Analog Extension interfaces
Three VoIP Codecs (G.723.1, G.711a, G.711u and G.729a)
4 Switched Ethernet ports (Layer 2)
Dedicated Switched Ethernet WAN port (Layer 3)
2x PCMCIA slots for Wireless and memory card support
WAN slot for optional voice/data WAN card (V24, V35, X.21, quad-BRI and T1/PRI)
DTE port
Audio port (not used)
External O/P socket (not used)
26 Installation and Configuration of the G150 Media Gateway
Appendix
Advertisement
Table of Contents
