Inverter Control Commands; Run-Fw; Run-Rv; Stop - Omron MX2 Series User Manual

Drive Programming

6-6 Inverter Control Commands

Command
Makes the inverter run the motor in
forward direction (starts the inverter
output).
This command is a shortcut of the func =
value command.
FW = 1 for RX and MX2 or UP =1 for LX
Note: The instruction is available since CX-Drive v2.10.
Command
Makes the inverter run the motor in
reverse direction (starts the inverter
output).
This command is a shortcut of the func =
value command.
RV = 1 for RX and MX2 or DOWN=1 for LX
Note: This instruction is available since CX-Drive v2.10.
Command
Makes the inverter decelerate and stop
the motor (stop the inverter output).

Stop

Command
It sets the frequency of the inverter.
This command is a shortcut of the '='
command.
Units: 0.01Hz.
Set-Freq = <value>
Note: This instruction is available since CX-Drive v2.10.
Run FW
Description
Format
Run RV
Description
Format
Stop
Description
Format
Set Freq
Description
Format
Arguments
---
Arguments
---
Arguments
---
Arguments
• Value: any variable or constant
(range from 0 to 40000).
74