Schedules Show Command; Firewall Rules Show Command; Show Security Schedules Setup; Show Security Firewall Ipv4 Setup Lan_Wan - NETGEAR ProSafe SRX5308 Cli Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

Schedules Show Command

show security schedules setup

This command displays the configured schedules:
Schedules
_________
List of Available Schedules
ROW ID Name Days
______ _________ _________________________ __________ ________
1 schedule1 Monday, Wednesday, Friday 07:15 AM
2 schedule2 All Days
3 schedule3 All Days

Firewall Rules Show Command

show security firewall ipv4 setup lan_wan

This command displays the configured IPv4 LAN WAN firewall rules:
Default Outbound Policy for IPv4 : Allow Always
LAN WAN Outbound Rules.
_______________________
ROWID Status Service Name Filter
_____ _______ ____________ _________________________________ _____________ ________ ___________ _________________ ______
29 Enabled HTTP ALLOW Always
30 Enabled AIM BLOCK by schedule,otherwise allow Any
LAN WAN Inbound Rules.
______________________
ROWID Status Service Name Filter
_____ _______ ____________ _________________________________ _____________________ ________ ____________ ___________ ___________ _________________ ______
31 Enabled FTP ALLOW Always
32 Enabled RTSP:TCP BLOCK by schedule,otherwise allow 192.168.20.171
Start Time End Time
12:00 AM
12:00 AM
LAN User WAN User QoS Profile Bandwidth Profile Log
SalesAmericas Any None PriorityQueue
Any Voice NONE
LAN Server IP Address LAN User WAN User
192.168.5.71 Any
VIPcustomers WAN1
Show Commands
292
06:30 PM
11:59 PM
12:00 AM
Never
Always
Destination QoS Profile Bandwidth Profile Log
None NONE
Voice NONE
Never
Always