NETGEAR ProSafe SRX5308 Cli Reference Manual page 102

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Step 1 Format
security services add
Mode security
Step 2 Format
name <service name>
protocol {TCP {start_port <number>} {finish_port <number>} |
Mode security-config [custom-service]
Keyword Associated Keyword to
Select or Parameter to Type
name service name
TCP, UDP, ICMP, or ICMPv6
protocol
start_port number
finish_port number
icmp_type number
Command example:
SRX5308> security services add
security-config[custom-service]> name Traceroute
security-config[custom-service]> protocol ICMP
security-config[custom-service]> icmp_type 20
security-config[custom-service]> save
Related show command:
security services edit <row id>
This command configures an existing firewall custom service. After you have issued the
security services edit command to specify the row to be edited, you enter the
security-config [custom-service] mode, and then you can edit the service. You cannot change
the service name.
Step 1 Format
security services edit <row id>
Mode security
UDP {start_port <number>} {finish_port <number>} |
ICMP {icmp_type <number> | ICMPv6 {icmp_type <number>}}
Description
The name (alphanumeric string) of the service.
Specifies the protocol type that applies to the service.
For TCP and UDP, the start port number (integer) of the
range used by the destination user. Valid numbers are from
1 to 65535.
For TCP and UDP, the end port number (integer) of the range
used by the destination user. Valid numbers are from 1 to
65535.
The ICMP type (integer) used by the destination user.
show security services setup
Security Mode Configuration Commands
102