Ipv4 Lan Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

Keyword (might consist of two
separate words)
{wan1 | wan2 | wan3 | wan4}
username
{wan1 | wan2 | wan3 | wan4}
password
{wan1 | wan2 | wan3 | wan4}
wild_flag_enable
{wan1 | wan2 | wan3 | wan4}
time_update_enable
Command example:
SRX5308> net ddns configure
net-config[ddns]> wan2 enable DynDNS
net-config[ddns]> wan2 hostname adminnetgear.dyndns.org
net-config[ddns]> wan2 username jaybrown
net-config[ddns]> wan2 password 4hg!RA278s
net-config[ddns]> wan2 wild_flag_enable N
net-config[ddns]> wan2 time_update_enable Y
net-config[ddns]> save
Related show command:

IPv4 LAN Commands

net lan ipv4 configure <vlan id>
This command configures a new or existing VLAN, that is, a VLAN ID and a VLAN profile.
After you have issued the net lan ipv4 configure command to specify a new or
existing VLAN ID, you enter the net-config [lan-ipv4] mode, and then you can configure one
keyword and associated parameter or associated keyword at a time in the order that you
prefer.
Step 1 Format
Mode
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Associated Keyword to
Select or Parameter to Type
user name
password
Y or N
Y or N
show net ddns setup
net lan ipv4 configure <vlan id>
net
Net Mode Configuration Commands
Description
Configures a user name (string) for a
DDNS server.
Configures a password (string) for a
DDNS server.
Enables or disables the use of wildcards
for DDNS.
Enables or disables the automatic update
of the DDNS service after 30 days.
54