NETGEAR ProSafe SRX5308 Cli Reference Manual page 57

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
net-config[lan-ipv4]> static address 192.168.1.1
net-config[lan-ipv4]> static subnet_mask 255.255.255.0
net-config[lan-ipv4]> dhcp mode DHCP-Relay
net-config[lan-ipv4]> dhcp relay_gateway 10.172.214.198
net-config[lan-ipv4]> proxy dns_enable N
net-config[lan-ipv4]> inter_vlan_routing Y
net-config[lan-ipv4]> save
Related show command:
net lan ipv4 delete <vlan id>
This command deletes a VLAN by deleting its ID. You cannot delete VLAN 1, the default
VLAN.
Format
net lan ipv4 delete <vlan id>
Mode net
Related show command:
net lan ipv4 disable <vlan id>
This command disables a VLAN by specifying its ID. You cannot disable VLAN 1, the default
VLAN.
Format
net lan ipv4 disable <vlan id>
Mode net
Related show command:
net lan ipv4 enable <vlan id>
This command enables a VLAN by specifying its ID. VLAN 1, the default VLAN, is always
enabled.
Format
net lan ipv4 enable <vlan id>
Mode net
show net lan ipv4 setup
show net lan ipv4 setup
show net lan ipv4 setup
Net Mode Configuration Commands
57