Administrative And Monitoring Settings (System Mode) Configuration Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

Table 8. Security mode configuration commands (continued)
Submode Command Name
security schedules edit {1 | 2 | 3}
schedules
security services add
security services delete <row id>
security services edit <row id>
security services ip_group add
security services ip_group add_ip_to
<group name>
security services ip_group delete <row id>
services
security services ip_group delete_ip <row id>
security services ip_group edit <row id>
security services qos_profile add
security services qos_profile delete <row id>
security services qos_profile edit <row id>
upnp security upnp configure
Administrative and Monitoring Settings (System Mode)
Configuration Commands
Enter the system ? command at the CLI prompt to display the submodes in the system
mode. The following table lists the submodes and their commands in alphabetical order:
Table 9. System mode configuration commands
Submode
logging
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command Name
system logging configure
system logging remote configure
Overview of the Configuration Commands
Purpose
Configure one of the three security
schedules.
Configure a new custom service.
Delete a custom service.
Configure an existing custom service.
Configure a new LAN or WAN IP group.
Add an IP address to a LAN or WAN IP
group.
Delete a LAN or WAN IP group.
Remove an IP address from a LAN or
WAN IP group.
Configure an existing LAN or WAN IP
group.
Add a QoS profile.
Delete a QoS profile.
Configure an existing QoS profile.
Configure UPnP.
Purpose
Configure routing logs for accepted and
dropped IPv4 and IPv6 packets.
Configure email logs and alerts, schedule
email logs and alerts, and configure a syslog
server.
23