Ipv4 Wan Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

net-config[port_setup]> upload_download download_speed_type 1-Gbps
net-config[port_setup]> save
Related show command:

IPv4 WAN Commands

net wan_settings wanmode configure
This command configures the mode of IPv4 routing between the WAN interface and LAN
interfaces. After you have issued the net wan_settings wanmode configure
command, you enter the net-config [routing-mode] mode, and then you can configure NAT or
classical routing.
WARNING!
Changing the mode of IPv4 routing causes all LAN–WAN and
DMZ–WAN inbound firewall settings to revert to default settings.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword
type
Command example:
FVS318N> net wan_settings wanmode configure
net-config[routing-mode]> NAT
net-config[routing-mode]> save
Related show command:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net wan port_setup <wan interface>
net wan_settings wanmode configure
net
type {NAT | Classical_Routing}
net-config [routing-mode]
Associated Keyword
to Select
NAT or
Classical_Routing
show net wan_settings wanmode
Net Mode Configuration Commands
Description
Specifies the IPv4 routing mode.
31