NETGEAR ProSafe SRX5308 Cli Reference Manual page 49

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (consists of two
separate words)
pppoe dhcpv6_option
pppoe primary_dns
pppoe secondary_dns
Command example:
SRX5308> net wan wan ipv6 configure WAN2
net-config[wan-ipv6]> isp type DHCPC
net-config[wan-ipv6]> dhcpc stateless_mode_enable StatelessAddrAutoConfig
net-config[wan-ipv6]> prefix_delegation_enable Y
net-config[wan-ipv6]> save
Associated Keyword to Select
or Parameter to Type
Disable-DHCPv6,
DHCPv6-StatelessMode,
DHCPv6-StatefulMode, or
DHCPv6-Prefix-Delegation
ipv6-address
ipv6-address
Net Mode Configuration Commands
49
Description
Specifies the DHCPv6 server options
for the PPPoE configuration:
• Disable-DHCPv6. DHCPv6 is
disabled. You need to issue the
pppoe primary_dns and pppoe
secondary_dns keywords and
specify DNS servers to receive an IP
address from the ISP.
• DHCPv6-StatelessMode. The VPN
firewall generates its own IP address
by using a combination of locally
available information and router
advertisements, but receives DNS
server information from the ISP's
DHCPv6 server. Router
advertisements include a prefix that
identifies the subnet that is
associated with the WAN port. The
IP address is formed by combining
this prefix and the MAC address of
the WAN port. The IP address is a
dynamic address.
• DHCPv6-StatefulMode. The VPN
firewall obtains an interface address,
configuration information such as
DNS server information, and other
parameters from the ISP's DHCPv6
server. The IP address is a dynamic
address.
• DHCPv6-Prefix-Delegation. The
VPN firewall obtains a prefix from the
ISP's DHCPv6 server through prefix
delegation. The VPN firewall's own
stateless DHCPv6 server can assign
this prefix to its IPv6 LAN clients.
The IPv6 address of the primary DNS
server if the DHCPv6 server option is
Disable-DHCPv6.
The IPv6 address of the secondary
DNS server if the DHCPv6 server
option is Disable-DHCPv6.