NETGEAR ProSafe SRX5308 Cli Reference Manual page 105

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
qos_priority
Command example:
SRX5308> security services qos_profile add
security-config[qosProfile]> profile name Voice
security-config[qosProfile]> remark Y
security-config[qosProfile]> qos_type DSCP
security-config[qosProfile]> qos_value 24
security-config[qosProfile]> qos_priority High
security-config[qosProfile]> save
Related show command:
security services qos_profile edit <row id>
This command configures an existing Quality of Service (QoS) profile that you can associate
with a nonblocking inbound or outbound IPv4 firewall rule. After you have issued the
security services qos_profile edit command to specify the row to be edited, you
enter the security-config [qosProfile] mode, and then you can configure one keyword and
associated parameter or associated keyword at a time in the order that you prefer. You
cannot change the name of the profile.
Step 1 Format
security services qos_profile edit <row id>
Mode security
Associated Keyword to
Select or Parameter to Type
Default, High,
Medium-high, Medium,
or Low
show security services qos_profile setup
Security Mode Configuration Commands
105
Description
Specifies the priority queue that
determines the allocation of excess
bandwidth and the classification level of
the packets among other priority queues
on the VPN firewall:
• Default. Traffic is mapped based on the
ToS field in the packet's IP header.
• High. This queue includes the following
DSCP values: AF41, AF42, AF43, AF44,
and CS4.
• Medium-high. This queue includes the
following DSCP values: AF31, AF32,
AF33, AF34, and CS3.
• Medium. This queue includes the
following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following
DSCP values: AF11, AF12, AF13, AF14,
CS1, 0, and all other values.