Ssl Vpn Authentication Group Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

SSL VPN Authentication Group Commands

vpn sslvpn users groups add
This command configures a new authentication group that is not limited to SSL VPN users.
After you have issued the vpn sslvpn users groups add command, you enter the
vpn-config [user-groups] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword
domain_name
group_name
idle_timeout
Command example:
SRX5308> vpn sslvpn users groups add
vpn-config[user-groups]> domain_name Headquarter
vpn-config[user-groups]> group_name Sales
vpn-config[user-groups]> idle_timeout 15
vpn-config[user-groups]> save
Related show command:
vpn sslvpn users groups edit <row id>
This command configures an existing authentication group that is not limited to SSL VPN
users. After you have issued the vpn sslvpn users groups edit command to specify
the row to be edited, you enter the vpn-config [user-groups] mode, and then you can change
the idle time-out only.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
vpn sslvpn users groups add
vpn
domain_name <domain name>
group_name <group name>
idle_timeout <minutes>
vpn-config [user-groups]
Associated Description
Parameter to Type
The domain name (alphanumeric string) to which the group
domain name
belongs.
Note:
Authentication Domain
The group name (alphanumeric string).
group name
The idle time-out in minutes.
minutes
show vpn sslvpn users groups
VPN Mode Configuration Commands
For information about configuring domains, see
Commands.
238
SSL VPN