NETGEAR ProSafe SRX5308 Cli Reference Manual page 200

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword
Action when limit is reached
block_type
send_email_alert
Command example:
SRX5308> system traffic_meter configure WAN1
system-config[traffic-meter]> enable Y
system-config[traffic-meter]> limit_type Downloadonly
system-config[traffic-meter]> monthly_limit 150000
system-config[traffic-meter]> increase_limit_enable Y
system-config[traffic-meter]> increase_limit_by 50000
system-config[traffic-meter]> counter SpecificTime
system-config[traffic-meter]> day_of_month 01
system-config[traffic-meter]> time_hour 00
system-config[traffic-meter]> time_meridian AM
system-config[traffic-meter]> time_minute 00
system-config[traffic-meter]> send_email_report Y
system-config[traffic-meter]> block_type Block-all-traffic-except-email
system-config[traffic-meter]> send_email_alert Y
system-config[traffic-meter]> save
Related show command:
Associated Keyword to Select or
Parameter to Type
Block-all-traffic, or
Block-all-traffic-except-email
Y or N
show system traffic_meter setup <wan interface>
System Mode Configuration Commands
200
Description
Specifies the type of traffic blocking
after the meter has exceeded the
configured limit.
Specifies whether or not an email alert
is sent when the traffic limit is
reached.