Show Net Protocol_Binding Setup - NETGEAR ProSafe SRX5308 Cli Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net wan wan ipv6 setup <wan interface>
This command displays the IPv6 WAN configuration. For the WAN interface, type WAN1,
WAN2, WAN3, or WAN4.
IPv6 WAN1 Setup
_______________
Dynamic IPv6 (DHCP) Configuration:
Stateless Address Auto Configuration: Enabled
Prefix Delegation: Disabled
show net wan wan ipv6 status <wan interface>
This command displays the IPv6 WAN1 connection status. For the WAN interface, type
WAN1, WAN2, WAN3, or WAN4.
IPv6 WAN1 Status
________________
IPv6 Connection Type: Dynamic IPv6 (DHCP)
IPv6 Connection State: Connected
IPv6 Address: fe80::a8ab:bbff:fe00:2
IPv6 Prefix Length: 64
Default IPv6 Gateway:
Primary DNS Server:
Secondary DNS Server:

show net protocol_binding setup

This command displays the protocol bindings:
List of Protocol Bindings.
__________________________
ROW ID State Service Local Gateway Source Network Destination Network
______ _______ _______ _____________ ______________ ___________________
1 Enabled FTP
2 Enabled PPTP
3 Enabled ANY
WAN1 Any
WAN3 Any
WAN1 Any
Show Commands
276
10.122.178.214
Any
Any