NETGEAR ProSafe SRX5308 Cli Reference Manual page 69

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Step 2 Format
start_address <ipv6-address>
end_address <ipv6-address>
prefix_length <prefix length>
Mode net-config [lan-ipv6-pool]
Keyword Associated
Parameter to Type
start_address ipv6-address
end_address ipv6-address
prefix_value prefix length
Related show command:
net lan ipv6 pool delete <row id>
This command deletes an IPv6 DHCP address pool by specifying its row ID.
Format
net lan ipv6 pool delete <row id>
Mode net
Related show command:
net lan ipv6 multi_homing add
This command configures a new IPv6 alias, that is, a secondary IPv6 address. After you
have issued the net lan ipv6 multi_homing add command, you enter the
net-config [lan-ipv6-multihoming] mode, and then you can configure the secondary address
and IPv6 prefix length in the order that you prefer.
Step 1 Format
net lan ipv6 multi_homing add
Mode net
Step 2 Format
ip_address <ipv6-address>
prefix_length <prefix length>
Mode net-config [lan-ipv6-multihoming]
Description
The start address of the IPv6 address pool.
The end address of the IPv6 address pool.
The prefix length for the IPv6 address pool.
show net lan ipv6 setup
show net lan ipv6 setup
Net Mode Configuration Commands
69