NETGEAR ProSafe SRX5308 Cli Reference Manual page 95

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
net routing static ipv4 delete_all
This command deletes all static IPv4 routes.
Format
net routing static ipv4 delete_all
Mode net
Related show command:
net routing dynamic configure
This command configures RIP and the associated MD5 key information. After you have
issued the net routing dynamic configure command, you enter the
net-config [dynamic-routing] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
net routing dynamic configure
Mode net
Step 2 Format
authentication_enable {Y | N}
direction {None | In-only | Out-only | Both}
version {Disabled | Rip1 | Rip2B | Rip2M}
first_key authentication_id <authentication key>
first_key id_number <number>
first_key valid_from {day <day>}
first_key valid_from {month <month>}
first_key valid_from {year <year>}}
first_key valid_from {hour <hour> |
first_key valid_from {minute <minute>}
first_key valid_from {second <second>}
first_key valid_to {day <day>}
first_key valid_to {month <month>}
first_key valid_to {year <year>}}
first_key valid_to {hour <hour> |
first_key valid_to {minute <minute>}
first_key valid_to {second <second>}
show net routing static ipv4 setup
Net Mode Configuration Commands
95