Address Filter And Ip/Mac Binding Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

security firewall advanced algs
This command configures Session Initiation Protocol (SIP) support for the application level
gateway (ALG). After you have issued the security firewall advanced algs
command, you enter the security-config [firewall-alg] mode, and then you can enable or
disable SIP support.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword
Sip
Command example:
FVS318N> security firewall advanced algs
security-config[firewall-alg]> Sip N
security-config[firewall-alg]> save
Related show command:

Address Filter and IP/MAC Binding Commands

security address_filter mac_filter configure
This command configures the source MAC address filter. After you have issued the
security address_filter mac_filter configure command, you enter the
security-config [mac-filter] mode, and then you can configure one keyword and associated
parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security firewall advanced algs
security
sip {Y | N}
security-config [firewall-alg]
Associated Keyword Description
to Select
Y or N Enables or disables SIP for the ALG.
show security firewall advanced algs
security address_filter mac_filter configure
security
enable {N | Y {policy {Permit-And-Block-Rest |
Block-And-Permit-Rest}}
security-config [mac-filter]
Security Mode Configuration Commands
168