NETGEAR ProSafe SRX5308 Cli Reference Manual page 89

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
Rate control profile settings
direction_for_rate_control Inbound, Outbound, or
congestion_priority
Associated Keyword to
Select or Parameter to Type
Both
Default, High,
Medium-high, Medium,
or Low
Net Mode Configuration Commands
89
Description
Specifies the direction to which rate
control is applied:
• Inbound. Rate control is applied to
inbound packets only. You need to issue
the inbound_min_bandwidth and
inbound_max_bandwidth keywords
and specify the bandwidth that is
allocated.
• Outbound. Rate control is applied to
outbound packets only. You need to
issue the outbound_min_bandwidth
and outbound_max_bandwidth
keywords and specify the bandwidth that
is allocated.
• Both. Rate control is applied to both
inbound and outbound packets. You
need to issue the
inbound_min_bandwidth,
inbound_max_bandwidth,
outbound_min_bandwidth, and
outbound_max_bandwidth keywords
and specify the bandwidth that is
allocated.
Specifies the priority queue that
determines the allocation of excess
bandwidth and the classification level of
the packets among other priority queues
on the VPN firewall:
• Default. Traffic is mapped based on the
ToS field in the packet's IP header.
• High. This queue includes the following
DSCP values: AF41, AF42, AF43, AF44,
and CS4.
• Medium-high. This queue includes the
following DSCP values: AF31, AF32,
AF33, AF34, and CS3.
• Medium. This queue includes the
following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following
DSCP values: AF11, AF12, AF13, AF14,
CS1, 0, and all other values.