NETGEAR ProSafe SRX5308 Cli Reference Manual page 130

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
Service name, action, and schedule
service_name
default_services
service_name
custom_services
action
schedule
DMZ user addresses and WAN user addresses
dmz_users
dmz_user_start_ip
dmz_user_end_ip
Associated Keyword to Select or
Parameter to Type
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP, DNS:TCP,
FINGER, FTP, HTTP, HTTPS,
ICMP-TYPE-3, ICMP-TYPE-4,
ICMP-TYPE-5, ICMP-TYPE-6,
ICMP-TYPE-7, ICMP-TYPE-8,
ICMP-TYPE-9, ICMP-TYPE-10,
ICMP-TYPE-11, ICMP-TYPE-13,
ICQ, IMAP2, IMAP3, IRC, NEWS, NFS,
NNTP, PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWORKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP, IDENT,
VDOLIVE, SSH, SIP-TCP, SIP-UDP,
NFS-TCP, or RPC-TCP
custom service name
ALWAYS_BLOCK, ALWAYS_ALLOW,
BLOCK_BY_SCHEDULE_ELSE_ALLOW,
or
ALLOW_BY_SCHEDULE_ELSE_BLOCK
Schedule1, Schedule2, or
Schedule3
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
ipaddress
Security Mode Configuration Commands
130
Description
Specifies the default service and
protocol to which the firewall rule
applies.
The custom service that you have
configured with the security
services add command and to
which the firewall rule applies.
Specifies the type of action to be
enforced by the rule.
Specifies the schedule, if any, that
is applicable to the rule.
Specifies the type of DMZ address.
There are two options:
• The IP address if the dmz_users
keyword is set to
SINGLE_ADDRESS.
• The start IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.
The end IP address if the
dmz_users keyword is set to
ADDRESS_RANGE.