NETGEAR ProSafe SRX5308 Cli Reference Manual page 152

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
Service name, action, and schedule
service_name
default_services
service_name
custom_services
action
schedule
LAN user addresses or LAN group and DMZ user addresses
lan_users address_wise
lan_user_start_ip
Associated Keyword to Select or
Parameter to Type
ANY, AIM, BGP, BOOTP_CLIENT,
BOOTP_SERVER, CU-SEEME:UDP,
CU-SEEME:TCP, DNS:UDP, DNS:TCP,
FINGER, FTP, HTTP, HTTPS,
ICMP-TYPE-3, ICMP-TYPE-4,
ICMP-TYPE-5, ICMP-TYPE-6,
ICMP-TYPE-7, ICMP-TYPE-8,
ICMP-TYPE-9, ICMP-TYPE-10,
ICMP-TYPE-11, ICMP-TYPE-13,
ICQ, IMAP2, IMAP3, IRC, NEWS, NFS,
NNTP, PING, POP3, PPTP, RCMD,
REAL-AUDIO, REXEC, RLOGIN,
RTELNET, RTSP:TCP, RTSP:UDP,
SFTP, SMTP, SNMP:TCP, SNMP:UDP,
SNMP-TRAPS:TCP,
SNMP-TRAPS:UDP, SQL-NET,
SSH:TCP, SSH:UDP, STRMWORKS,
TACACS, TELNET, TFTP, RIP, IKE,
SHTTPD, IPSEC-UDP-ENCAP, IDENT,
VDOLIVE, SSH, SIP-TCP, SIP-UDP,
NFS-TCP, or RPC-TCP
custom service name
ALWAYS_BLOCK, ALWAYS_ALLOW,
BLOCK_BY_SCHEDULE_ELSE_ALLOW,
or
ALLOW_BY_SCHEDULE_ELSE_BLOCK
Schedule1, Schedule2, or
Schedule3
ANY, SINGLE_ADDRESS, or
ADDRESS_RANGE
ipaddress
Security Mode Configuration Commands
152
Description
Specifies the default service and
protocol to which the firewall rule
applies.
The custom service that you have
configured with the security
services add command and to
which the firewall rule applies.
Specifies the type of action to be
enforced by the rule.
Specifies the schedule, if any, that
is applicable to the rule.
Specifies the type of LAN address.
The address_wise and
group_wise keywords are
mutually exclusive.
There are two options:
• The IP address if the lan_users
address_wise keywords are set
to SINGLE_ADDRESS.
• The start IP address if the
lan_users address_wise
keywords are set to
ADDRESS_RANGE.