Vpn Settings (Vpn Mode) Configuration Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

Table 9. System mode configuration commands (continued)
Submode
remote_management
snmp
time
traffic_meter

VPN Settings (VPN Mode) Configuration Commands

Enter the vpn ? command at the CLI prompt to display the submodes in the vpn mode. The
following table lists the submodes and their commands in alphabetical order:
Table 10. Configuration commands: vpn mode
Submode Command Name
vpn ipsec ikepolicy configure <ike policy name>
vpn ipsec ikepolicy delete <ike policy name>
vpn ipsec mode_config configure <record name>
vpn ipsec mode_config delete <record name>
vpn ipsec radius configure
vpn ipsec vpnpolicy configure <vpn policy name>
ipsec
vpn ipsec vpnpolicy connect <vpn policy name>
vpn ipsec vpnpolicy delete <vpn policy name>
vpn ipsec vpnpolicy disable <vpn policy name>
vpn ipsec vpnpolicy drop <vpn policy name>
vpn ipsec vpnpolicy enable <vpn policy name>
vpn ipsec wizard configure <Gateway | VPN_Client>
l2tp vpn l2tp server configure
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Command Name
system remote_management https
configure
system remote_management telnet
configure
system snmp sys configure
system time configure
system traffic_meter configure
<wan interface>
Overview of the Configuration Commands
Purpose
Configure remote management over HTTPS.
Configure remote management over Telnet.
Configure the SNMP system information.
Configure the system time, date, and NTP
servers.
Configure the WAN traffic meter.
Purpose
Configure a new or existing manual IPSec
IKE policy.
Delete an IPSec policy.
Configure a new or existing Mode Config
record.
Delete a Mode Config record.
Configure the RADIUS servers.
Configure a new or existing auto IPSec
VPN policy or manual IPSec VPN policy.
Establish a VPN connection.
Delete an IPSec VPN policy.
Disable an IPSec VPN policy.
Terminate an IPSec VPN connection.
Enable an IPSec VPN policy.
Configure the IPSec VPN wizard for a
gateway-to-gateway or gateway-to-VPN
client connection.
Configure the L2TP server.
24