NETGEAR ProSafe SRX5308 Cli Reference Manual page 84

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
congestion_priority
hosts
hosts_start_ip
Associated Keyword to
Select or Parameter to Type
Default, High,
Medium-high, Medium,
or Low
Single-IP-Address,
IP-Address-Range, or
Group
ipaddress
Net Mode Configuration Commands
84
Description
Specifies the priority queue that
determines the allocation of excess
bandwidth and the classification level of
the packets among other priority queues
on the VPN firewall:
• Default. Traffic is mapped based on the
ToS field in the packet's IP header.
• High. This queue includes the following
DSCP values: AF41, AF42, AF43, AF44,
and CS4.
• Medium-high. This queue includes the
following DSCP values: AF31, AF32,
AF33, AF34, and CS3.
• Medium. This queue includes the
following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following
DSCP values: AF11, AF12, AF13, AF14,
CS1, 0, and all other values.
Specifies the IP address, range of IP
addresses, or group to which the profile is
applied:
• Single-IP-Address. The profile is
applied to a single IP address. Issue the
hosts_start_ip keyword to specify
the IP address.
• IP-Address-Range. The profile is
applied to an IP address range. Issue
the hosts_start_ip and
hosts_end_ip keywords to specify the
start and end IP addresses of the range.
In addition, issue the
bandwidth_allocation keyword to
specify if bandwidth is shared between
all IP addresses in the range or is
allocated to each IP address in the
range.
• Group. The profile is applied to a group.
Issue the hosts_group to specify the
group. In addition, issue the
bandwidth_allocation keyword to
specify if bandwidth is shared between
all members of the group or is allocated
to each member in the group.
There are two options:
• The IP address if the hosts keyword is
set to Single-IP-Address.
• The start IP address if the hosts
keyword is set to IP-Address-Range.