Ipv4 Dmz Setup Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

net lan ipv6 prefix_delegation delete <row id>
This command deletes an IPv6 prefix for LAN prefix delegation by deleting its row ID.
Format
net lan ipv6 prefix_delegation delete <row id>
Mode net
Related show command:

IPv4 DMZ Setup Commands

net dmz ipv4 configure
This command enables, configures, or disables the IPv4 DMZ. After you have issued the net
dmz ipv4 configure command, you enter the net-config [dmz-ipv4] mode, and then you
can configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
show net lan ipv6 setup
net dmz ipv4 configure
net
enable_dmz {Y | N}
ip_address <ipaddress>
subnet_mask <subnet mask>
dhcp_mode {None | DHCP-Server | DHCP-Relay}
dns_proxy_enable {Y | N}
domain_name <domain name>
starting_ip_address <ipaddress>
ending_ip_address <ipaddress>
primary_dns_server <ipaddress>
secondary_dns_server <ipaddress>
wins_server <ipaddress>
lease_time <hours>
enable_ldap {Y | N}
ldap_serverip <ipaddress>
ldap_search_base <search base>
ldap_port <number>
relay_gateway <ipaddress>
net-config [dmz-ipv4]
Net Mode Configuration Commands
74