NETGEAR ProSafe SRX5308 Cli Reference Manual page 164

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security-config[vpn-passthrough]> l2tp_enable Y
security-config[vpn-passthrough]> pptp_enable N
security-config[vpn-passthrough]> save
Related show command:
security firewall attack_checks configure ipv6
This command configures ipv6 WAN security attack checks. After you have issued the
security firewall attack_checks configure ipv6 command, you enter the
security-config [attack-checks-ipv6] mode, and then you can edit one keyword and
associated parameter or associated keyword at a time in the order that you prefer.
Step 1 Format
security firewall attack_checks configure ipv6
Mode security
Step 2 Format
respond_to_ping_on_internet_ports {Y | N}
vpn_ipsec_passthrough {Y | N}
Mode security-config [attack-checks-ipv6]
Keyword
respond_to_ping_on_internet_ports Y or N
vpn_ipsec_passthrough
Command example:
SRX5308> security firewall attack_checks configure ipv6
security-config[attack-checks-ipv6]> respond_to_ping_on_internet_ports N
security-config[attack-checks-ipv6]> vpn_ipsec_passthrough Y
security-config[attack-checks-ipv6]> save
Related show command:
show security firewall attack_checks vpn_passthrough setup
Associated Keyword
to Select
Y or N
show security firewall attack_checks setup ipv6
Security Mode Configuration Commands
164
Description
Enables or disables the response to a
ping from the WAN port.
Enables or disables IPSec VPN traffic
that is initiated from the LAN to reach the
WAN, irrespective of the default firewall
outbound policy and custom firewall
rules.