Util Ping_Through_Vpn_Tunnel; Util Traceroute; Util Routing_Table_Ipv - NETGEAR ProSafe SRX5308 Cli Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

util ping_through_vpn_tunnel

This command pings a VPN endpoint IP address with 56 data bytes through a VPN tunnel
and displays the ping information.
Format
util ping_through_vpn_tunnel <ipaddress>
Mode util
SRX5308> util ping_through_vpn_tunnel 10.136.24.128
Pinging 192.168.1.1 from 5
Ping passed
64 bytes from 10.136.24.128: icmp_seq=0 ttl=64
64 bytes from 10.136.24.128: icmp_seq=1 ttl=64
64 bytes from 10.136.24.128: icmp_seq=2 ttl=64
64 bytes from 10.136.24.128: icmp_seq=3 ttl=64
64 bytes from 10.136.24.128: icmp_seq=4 ttl=64

util traceroute

This command traces a route to an IP address.
Format
util traceroute <ipaddress>
Mode util
SRX5308> util traceroute 10.136.24.128
traceroute to 10.136.24.128 (10.136.24.128), 30 hops max, 40 byte packets|
1 (10.136.24.128)

util routing_table_ipv4

This command displays the IPv4 routing table.
Format
util routing_table_ipv4
Mode util
util routing_table_ipv6
This command displays the IPv6 routing table.
Format
util routing_table_ipv6
Mode util
0.516 ms 0.227 ms
Utility Commands
324
0.218 ms