Logs Show Commands; Show System Logging Remote Setup; Show System Logs - NETGEAR ProSafe SRX5308 Cli Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

show system logging remote setup

This command displays the configuration and the schedule of the email logs:
Log Identifier: SRX5308-BLD3
Enable E-Mail Logs
__________________
E-Mail Server Address: SMTP.Netgear.com
Return E-Mail Address: SRX5308@netgear.com
Send to E-Mail Address: admin2@netgear.com
Authentication: No Authentication
Respond to Identd from SMTP Server: N
Send E-mail logs by Schedule
____________________________
Unit: Weekly
Day: Sunday
Time: 03 AM
Syslog Configuration
____________________
Syslog Server: Disabled

Logs Show Commands

show system logs

This command displays the system logs (the following example shows only part of the
command output):
Tue Jul 10 10:23:55 2012(GMT -0800) [SRX5308][Kernel][KERNEL] p->perfect
0000000000000000 p->h a800000417bab200
Tue Jul 10 10:23:55 2012(GMT -0800) [SRX5308][Kernel][KERNEL] HTB: quantum of
class 10001 is big. Consider r2q change.
Tue Jul 10 10:23:55 2012(GMT -0800) [SRX5308][Kernel][KERNEL] HTB: quantum of
class 10002 is big. Consider r2q change.
Tue Jul 10 10:23:55 2012(GMT -0800) [SRX5308][Kernel][KERNEL] HTB: quantum of
class 11024 is big. Consider r2q change.
Tue Jul 10 10:24:00 2012(GMT -0800) [SRX5308][Kernel][KERNEL] eth0.1: del
01:00:5e:7f:ff:fa mcast address from master interface
Show Commands
309