Ssl Vpn Client And Client Route Commands - NETGEAR ProSafe SRX5308 Cli Reference Manual

Keyword
server_ip
domain_name
Command example:
SRX5308> vpn sslvpn portforwarding hostconfig add
vpn-config[portforwarding-host-settings]> server_ip 192.168.51.227
vpn-config[portforwarding-host-settings]> domain_name RemoteDesktop
vpn-config[portforwarding-host-settings]> save
Related show command:
vpn sslvpn portforwarding hostconfig delete <row id>
This command deletes a host name for an SSL port forwarding application by specifying the
row ID of the host name.
Format
vpn sslvpn portforwarding hostconfig delete <row id>
Mode vpn
Related show command:

SSL VPN Client and Client Route Commands

vpn sslvpn client ipv4
This command configures the SSL client IP address range. After you have issued the vpn
sslvpn client ipv4 command, you enter the vpn-config [sslvpn-client-ipv4-settings]
mode, and then you can configure one keyword and associated parameter or associated
keyword at a time in the order that you prefer.
Step 1 Format
Mode
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Associated Description
Parameter to Type
The IP address of the local server that hosts the application.
ipaddress
Note:
that you assigned through the
appconfig add
The domain name for the local server that hosts the application.
domain name
show vpn sslvpn portforwarding hostconfig
show vpn sslvpn portforwarding hostconfig
vpn sslvpn client ipv4
vpn
VPN Mode Configuration Commands
The IP address needs to be the same as the IP address
vpn sslvpn portforwarding
command for the same application.
248