NETGEAR ProSafe SRX5308 Cli Reference Manual page 197

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Table 11. Timezone keywords (continued)
GMT time and location
Note: Enter the keywords exactly as stated (you can use autocompletion keys). If
there are two locations for the same time zone, enter the location exactly as stated.
For example, either enter GMT-11:00::Samoa or enter GMT-10:00::Hawaii.
GMT+11:30::Norfolk_I
GMT+12:00::Auckland
GMT+12:00::Wellington
GMT+12:00::New_Zealand
GMT+12:00::Fiji
GMT+13:00::Tonga
GMT+14:00::Kiribati
Command example:
SRX5308> system time configure
system-config[time]> timezone GMT-08:00::Pacific_Time-US
system-config[time]> auto_daylight Y
system-config[time]> resolve_ipv6_address N
system-config[time]> ntp_mode Sync_to_NTP_Servers_on_Internet
system-config[time]> use_default_servers Y
system-config[time]> configure_ntp_servers N
system-config[time]> save
Related show command: show system time setup
System Mode Configuration Commands
197